brief introduction
This series of products is the straight type two position three way solenoid valve driven by the electromagnetic force of the connecting thread. The design and identification of solenoid valve with RCC-E, IEEE323, IEEE344, IEEE382, EJ/T standard, applicable to the nuclear power plant and chemical control pipeline system dynamic nuclear safety requirements of pneumatic or hydraulic control pipeline, medium access, reversing and distribution. In the industry said the solenoid valve solenoid valve for instrument.
main features
1. direct drive type structure, can realize the zero pressure normal opening and closing the valve, small volume and light weight, flexible and reliable action.
2. according to the requirements with a manual device, can realize the manual operation and maintenance in power under special conditions.
3. all the rubber parts, can be used in high radiation and temperature jump conditions.
4. high insulation grade high protection grade: insulation coil H, and can meet the application conditions of LOCA.
5. meet the application under seismic conditions.
6. according to the need of the design and manufacture of a flameproof type, can be used in explosive environment.
The main technical parameters
1. security levels: 1E/K1, K2, K3
2. seismic category: 1A
3. explosion-proof grade: Exd II CT6
4. supply voltage: AC/DC12V, DC24V, DC48V, DC110V, DC220V
5. protection grade: IP65
6. on / off / failure: open / close the valve on / off valve
7. working pressure: 0 ~ 0.9MPa
8. working medium: neutral gas and liquid medium
9. medium temperature: -20 to +80 DEG C
10. temperature: -20 to +60 DEG C
11. electrical interface: electrical connector (K1) or (K2/K3), cable crimping cable diameter: diameter of 12.5 ~ 13.7mm in diameter
12. installation: arbitrary direction.
13. medium containing dirt, using filter
14. body material: brass or stainless steel forging
