brief introduction
This series of products is a pilot type two position three way solenoid valve with internal thread connection. The design and appraisal of solenoid valves conform to RCC-E, IEEE323, IEEE344, IEEE382 and EJ/T standards. They are suitable for the pneumatic or hydraulic control pipeline systems with nuclear safety requirements in nuclear power plants and nuclear chemical industry to control the connection, reversal and distribution of pipeline media. This kind of solenoid valve is also called the instrument solenoid valve in the industry.
main features
1. with manual device, manual operation can be realized under special conditions such as power failure and maintenance.
2. all rubber parts can be used under high radioactive and temperature sudden environmental conditions.
3. High insulation level and high protection level: The insulation level of coil is H, and can meet the application of LOCA environment.
4. meet seismic applications.
5. small size, light weight, flexible and reliable action.
Main technical parameters
1. security level: 1E/K1, K2, K3
2. aseismic categories: 1A
3. explosion-proof level: Exd II CT6
4. power supply voltage: AC/DC12V, DC24V, DC48V, DC110V, DC220V
5. protection level: IP65
6. power / power-off / failure mode: open valve / turn off valve / shut off valve.
7. design pressure: 4 MPa (max)
8. working pressure: 0.1 ~ 1.0MPa
9. working medium: gas and neutral liquid medium
10. medium temperature: -20 C ~ +80 C
11. ambient temperature: -20 C ~ +60 C
12. electrical interface: electrical connector (K1) or cable crimping (K2/K3), outer diameter of cable: 12.5 to 13.7mm
13. installation direction: arbitrary
14. when using fouling medium, filter is used.
15. body material: forging brass or stainless steel.
