2/2 hydraulic angular discharge valve

brief introduction

J744X-3 series hydraulic angle type valve, mainly used for water purification and the bottom of the pool, the automatic control system of sludge discharge.

main features

1, this product without external hydraulic source, can be directly used tap water purification water stress in the pool as a source of pressure of the hydraulic cylinder.

2. Hydraulic angle cut-off valve is mainly composed of two parts: hydraulic cylinder and angle type globe valve.

3, this series of products with a straight moving type two position four way solenoid valve (or two straight type two position three way solenoid valve), control of the hydraulic cylinder piston, driven by the angle of valve lift, open or close the valve to the fluid off.

4, the hydraulic cylinder piston ring material is made of cowhide through special processing, good sealing performance, wear resistance and long service life.

5, hydraulic angle cut-off valve can be specially equipped with signal device, feedback valve position.

Main technical parameters

1. Nominal diameter: 150, 200, 250, mm

2, angle valve nominal pressure: 0 ~ 0.3MPa

3, hydraulic cylinder working pressure: 0.1 ~ 0.8 MPa

4, hydraulic cylinder working medium: water, gas, oil, please note when ordering.

5, medium temperature of hydraulic cylinder: 0~+80 C

6. Ambient temperature: +5 ~ +40 C

7, supply voltage: AC220V DC24V