Brief introduction of direct acting solenoid valve
This series of products is a pilot type two-position three-way solenoid valve. Its design and appraisal conform to RCC-E, IEEE323, IEEE344, IEEE382, EJ/T standards. It is suitable for nuclear power plant and nuclear chemical industry control pipeline system with nuclear safety level requirements to control the connection and commutation of pipeline media. This kind of solenoid valve is also called the instrument solenoid valve in the industry.
main features
1. with manual device, manual operation can be realized under special conditions such as power failure and maintenance.
2. all rubber parts can be used under high radioactive and temperature sudden environmental conditions.
3. High insulation level and high protection level: The insulation level of coil is H, and can meet the application of LOCA environment.
4. meet seismic applications.
5. small size, light weight, flexible and reliable action.
Main technical parameters
1. security level: 1E/K1, K2, K3
2. aseismic categories: 1A
3. design pressure: 1.0MPa
4. design temperature: 100 C (max)
5. ambient temperature: -20 ~ +80 C
6. working medium: compressed air
7. supply voltage: AC/DC24V 48V 110V 220V 380V and so on.
8. rated power: 15W (max)
9. working system: long term
10. response time: less than 2S
11. protection level: IP65
12. electrical interface: Cable crimping, cable outer diameter: 9.5 0.5mm
13. installation direction: arbitrary
14. fouling medium: 14um filter.
15. body material: stainless steel.
